This unit has an input of 220~240V AC, with a voltage range of -30%, + 25%.
Supplied with downloadable software and USB cable.
The output is simulated sine wave on battery mode and is by 3 x 13A UK sockets and 2 x IEC sockets.
Designed to offer total power protection to a broad range of commercial and industrial environments.
Applications include PCs, workstations, and printers.
Provides clean and reliable backup power to ensure continued data integrity and optimum performance under a wide range of mains power conditions.
This high level of power protection can be incorporated with the advance power and management diagnosis software package that will allow your IT manager or systems integrator to remotely monitor and manage both the UPS and the network server.
The transfer time is typically less than 6ms.
The typical recharging time is 5 hours recovering to 90% capacity.
Overload and overcharge protection.
Noise level less than 40dB.
Management data is via the USB port and it supports Windows 95/98/NT/2000/ME/XP/2003/Vista/7/8/10.
The operational environment has a humidity range of 0~95% RH at 40 °C (non-condensing).
Main features include:
Controlled by a technologically advanced microprocessor guaranteeing high reliability.
Equipped with 2-steps boost & 1- step buck AVR to stabilize output voltage.
USB port and monitor software is designed to manage UPS status via PC (optional).
Built-in DC start function enables UPS to be started without AC power supplied.
Constant current, constant voltage battery charger (CCCV Battery Charger)
UPS will charge itself even though power switch is off (Off mode charging)
UPS will shut down upon battery low; UPS will restart automatically upon AC recovery (Auto-restart)
Over/under voltage protection (UPS will go to battery mode)
Easy replacement battery design
Lightning/surge protection 175 joules
Battery mode: Two short tones every 8 seconds
Low battery: Four short tones every second
Overload: Beeping continuously
Fault: Beeping continuously