In addition to the key protection features such as overload protection, over voltage protection, battery low voltage disconnect, and battery reverse polarity protection, the DRS-240 also provides Form-C contacts and LED indicator alarm signals for AC-fail, battery low, charger circuit fail, and DC-OK to allow easy integration into security systems that comply with local alarm codes.

The post DRS-240 – 24- 240W AC/DC DIN Rail Type Security Power Supply appeared first on Eastern Transformers & Equipment.

In addition to the key protection features such as overload protection, over voltage protection, battery low voltage disconnect, and battery reverse polarity protection, the DRS-240 also provides Form-C contacts and LED indicator alarm signals for AC-fail, battery low, charger circuit fail, and DC-OK to allow easy integration into security systems that comply with local alarm codes.

The post DRS-240 – 12- 240W AC/DC DIN Rail Type Security Power Supply appeared first on Eastern Transformers & Equipment.

3,000 Watt rating.

Output voltage of 24V DC.

Built-in PFC function.

Forced air cooling by built-in DC fan.

LED indicator for power on.

Remote ON/OFF control.

UL, TUV, and EN approved.

CE marked.

Full 3 year warranty.

The post RSP 3,000 Watt Enclosed Power Supply with PFC 24V DC 125A appeared first on Eastern Transformers & Equipment.

Constant voltage and constant current mode output LED driver.

DALI control technology.

Protection rating of IP67 for indoor and outdoor installations.

Built-in active PFC function.

Metal housing design with frame ground.

Class 2 power unit.

No load / standby consumption < 0.5W. Typical lifetime > 50,000 hours.

Applications include: LED street lighting, LED architectural, LED bay lighting, and LED floodlighting.

UL 8750 Listed for use in Class I, Division 2 hazardous (classified) locations.

Input wiring type is 3-wire.

Designed to UL 8750, CSA C22.2 No. 250. 13-12, IEC 61347-1, EN 61347-1, AS 61347-1, NZS 61347-1, IEC 61347-2-13, EN 61347-2-13, AS 61347-2-13, NZS 61347-2-13, EN 62384, EAC TP TC 004, GB 19510.1, GB 19510.14, KC 61347-1, and KC 61347-2-13 safety standards.

CE marked.

Full 5 year warranty.

The post ELG 75 Watt LED Driver with PFC and DALI to IP67 24V DC appeared first on Eastern Transformers & Equipment.

Supplied with downloadable software and USB cable.

The output is simulated sine wave on battery mode and is by 2 x 13A UK sockets.

Designed to offer total power protection to a broad range of commercial and industrial environments.

Applications include PCs, workstations, and printers.

Provides clean and reliable backup power to ensure continued data integrity and optimum performance under a wide range of mains power conditions.

This high level of power protection can be incorporated with the advance power and management diagnosis software package that will allow your IT manager or systems integrator to remotely monitor and manage both the UPS and the network server.

The transfer time is typically less than 6ms.

The typical recharging time is 5 hours recovering to 90% capacity.

Overload and overcharge protection.

Noise level less than 40dB.

Management data is via the USB port and it supports Windows 95/98/NT/2000/ME/XP/2003/Vista/7/8/10.

The operational environment has a humidity range of 0~95% RH at 40 °C (non-condensing).

Main features include:

Controlled by a technologically advanced microprocessor guaranteeing high reliability

Equipped with 2-steps boost & 1- step buck AVR to stabilize output voltage

USB port and monitor software is designed to manage UPS status via PC (optional)

Built-in DC start function enables UPS to be started without AC power supplied

Constant current, constant voltage battery charger (CCCV Battery Charger)

UPS will charge itself even though power switch is off (Off mode charging)

UPS will shut down upon battery low; UPS will restart automatically upon AC recovery (Auto-restart)

Over/under voltage protection (UPS will go to battery mode)

Easy replacement battery design

Lightning/surge protection 175 joules

Audible alarm:
Battery mode: Two short tones every 8 seconds
Low battery: Four short tones every second
Overload: Beeping continuously
Fault: Beeping continuously

The post Uninterruptible Power Supply (UPS) with LCD Display 600VA appeared first on Eastern Transformers & Equipment.

Supplied with downloadable software and USB cable.

The output is simulated sine wave on battery mode and is by 2 x 13A UK sockets.

Designed to offer total power protection to a broad range of commercial and industrial environments.

Applications include PCs, workstations, and printers.

Provides clean and reliable backup power to ensure continued data integrity and optimum performance under a wide range of mains power conditions.

This high level of power protection can be incorporated with the advance power and management diagnosis software package that will allow your IT manager or systems integrator to remotely monitor and manage both the UPS and the network server.

The transfer time is typically less than 6ms.

The typical recharging time is 5 hours recovering to 90% capacity.

Overload and overcharge protection.

Noise level less than 40dB.

Management data is via the USB port and it supports Windows 95/98/NT/2000/ME/XP/2003/Vista/7/8/10.

The operational environment has a humidity range of 0~95% RH at 40 °C (non-condensing).

Main features include:

Controlled by a technologically advanced microprocessor guaranteeing high reliability

Equipped with 2-steps boost & 1- step buck AVR to stabilize output voltage

USB port and monitor software is designed to manage UPS status via PC (optional)

Built-in DC start function enables UPS to be started without AC power supplied

Constant current, constant voltage battery charger (CCCV Battery Charger)

UPS will charge itself even though power switch is off (Off mode charging)

UPS will shut down upon battery low; UPS will restart automatically upon AC recovery (Auto-restart)

Over/under voltage protection (UPS will go to battery mode)

Easy replacement battery design

Lightning/surge protection 175 joules

Audible alarm:
Battery mode: Two short tones every 8 seconds
Low battery: Four short tones every second
Overload: Beeping continuously
Fault: Beeping continuously

The post Uninterruptible Power Supply (UPS) with LCD Display 800VA appeared first on Eastern Transformers & Equipment.

Supplied with downloadable software and USB cable.

The output is simulated sine wave on battery mode and is by 3 x 13A UK sockets and 2 x IEC sockets.

Designed to offer total power protection to a broad range of commercial and industrial environments.

Applications include PCs, workstations, and printers.

Provides clean and reliable backup power to ensure continued data integrity and optimum performance under a wide range of mains power conditions.

This high level of power protection can be incorporated with the advance power and management diagnosis software package that will allow your IT manager or systems integrator to remotely monitor and manage both the UPS and the network server.

The transfer time is typically less than 6ms.

The typical recharging time is 5 hours recovering to 90% capacity.

Overload and overcharge protection.

Noise level less than 40dB.

Management data is via the USB port and it supports Windows 95/98/NT/2000/ME/XP/2003/Vista/7/8/10.

The operational environment has a humidity range of 0~95% RH at 40 °C (non-condensing).

Main features include:

Controlled by a technologically advanced microprocessor guaranteeing high reliability.

Equipped with 2-steps boost & 1- step buck AVR to stabilize output voltage.

USB port and monitor software is designed to manage UPS status via PC (optional).

Built-in DC start function enables UPS to be started without AC power supplied.

Constant current, constant voltage battery charger (CCCV Battery Charger)

UPS will charge itself even though power switch is off (Off mode charging)

UPS will shut down upon battery low; UPS will restart automatically upon AC recovery (Auto-restart)

Over/under voltage protection (UPS will go to battery mode)

Easy replacement battery design

Lightning/surge protection 175 joules

Audible alarm:
Battery mode: Two short tones every 8 seconds
Low battery: Four short tones every second
Overload: Beeping continuously
Fault: Beeping continuously

The post Uninterruptible Power Supply (UPS) with LCD Display 1000VA appeared first on Eastern Transformers & Equipment.

Supplied with downloadable software and USB cable.

The output is simulated sine wave on battery mode and is by 3 x 13A UK sockets and 2 x IEC sockets.

Designed to offer total power protection to a broad range of commercial and industrial environments.

Applications include PCs, workstations, and printers.

Provides clean and reliable backup power to ensure continued data integrity and optimum performance under a wide range of mains power conditions.

This high level of power protection can be incorporated with the advance power and management diagnosis software package that will allow your IT manager or systems integrator to remotely monitor and manage both the UPS and the network server.

The transfer time is typically less than 6ms.

The typical recharging time is 5 hours recovering to 90% capacity.

Overload and overcharge protection.

Noise level less than 40dB.

Management data is via the USB port and it supports Windows 95/98/NT/2000/ME/XP/2003/Vista/7/8/10.

The operational environment has a humidity range of 0~95% RH at 40 °C (non-condensing).

Main features include:

Controlled by a technologically advanced microprocessor guaranteeing high reliability.

Equipped with 2-steps boost & 1- step buck AVR to stabilize output voltage.

USB port and monitor software is designed to manage UPS status via PC (optional).

Built-in DC start function enables UPS to be started without AC power supplied.

Constant current, constant voltage battery charger (CCCV Battery Charger)

UPS will charge itself even though power switch is off (Off mode charging)

UPS will shut down upon battery low; UPS will restart automatically upon AC recovery (Auto-restart)

Over/under voltage protection (UPS will go to battery mode)

Easy replacement battery design

Lightning/surge protection 175 joules

Audible alarm:
Battery mode: Two short tones every 8 seconds
Low battery: Four short tones every second
Overload: Beeping continuously
Fault: Beeping continuously

The post Uninterruptible Power Supply (UPS) with LCD Display 1200VA appeared first on Eastern Transformers & Equipment.

Supplied with downloadable software and USB cable.

The output is simulated sine wave on battery mode and is by 3 x 13A UK sockets and 2 x IEC sockets.

Designed to offer total power protection to a broad range of commercial and industrial environments.

Applications include PCs, workstations, and printers.

Provides clean and reliable backup power to ensure continued data integrity and optimum performance under a wide range of mains power conditions.

This high level of power protection can be incorporated with the advance power and management diagnosis software package that will allow your IT manager or systems integrator to remotely monitor and manage both the UPS and the network server.

The transfer time is typically less than 6ms.

The typical recharging time is 5 hours recovering to 90% capacity.

Overload and overcharge protection.

Noise level less than 40dB.

Management data is via the USB port and it supports Windows 95/98/NT/2000/ME/XP/2003/Vista/7/8/10.

The operational environment has a humidity range of 0~95% RH at 40 °C (non-condensing).

Main features include:

Controlled by a technologically advanced microprocessor guaranteeing high reliability.

Equipped with 2-steps boost & 1- step buck AVR to stabilize output voltage.

USB port and monitor software is designed to manage UPS status via PC (optional).

Built-in DC start function enables UPS to be started without AC power supplied.

Constant current, constant voltage battery charger (CCCV Battery Charger)

UPS will charge itself even though power switch is off (Off mode charging)

UPS will shut down upon battery low; UPS will restart automatically upon AC recovery (Auto-restart)

Over/under voltage protection (UPS will go to battery mode)

Easy replacement battery design

Lightning/surge protection 175 joules

Audible alarm:
Battery mode: Two short tones every 8 seconds
Low battery: Four short tones every second
Overload: Beeping continuously
Fault: Beeping continuously

The post Uninterruptible Power Supply (UPS) with LCD Display 1500VA appeared first on Eastern Transformers & Equipment.

Supplied with downloadable software and USB cable.

The output is simulated sine wave on battery mode and is by 3 x 13A UK sockets and 2 x IEC sockets.

Designed to offer total power protection to a broad range of commercial and industrial environments.

Applications include PCs, workstations, and printers.

Provides clean and reliable backup power to ensure continued data integrity and optimum performance under a wide range of mains power conditions.

This high level of power protection can be incorporated with the advance power and management diagnosis software package that will allow your IT manager or systems integrator to remotely monitor and manage both the UPS and the network server.

The transfer time is typically less than 6ms.

The typical recharging time is 5 hours recovering to 90% capacity.

Overload and overcharge protection.

Noise level less than 40dB.

Management data is via the USB port and it supports Windows 95/98/NT/2000/ME/XP/2003/Vista/7/8/10.

The operational environment has a humidity range of 0~95% RH at 40 °C (non-condensing).

Main features include:

Controlled by a technologically advanced microprocessor guaranteeing high reliability.

Equipped with 2-steps boost & 1- step buck AVR to stabilize output voltage.

USB port and monitor software is designed to manage UPS status via PC (optional).

Built-in DC start function enables UPS to be started without AC power supplied.

Constant current, constant voltage battery charger (CCCV Battery Charger)

UPS will charge itself even though power switch is off (Off mode charging)

UPS will shut down upon battery low; UPS will restart automatically upon AC recovery (Auto-restart)

Over/under voltage protection (UPS will go to battery mode)

Easy replacement battery design

Lightning/surge protection 175 joules

Audible alarm:
Battery mode: Two short tones every 8 seconds
Low battery: Four short tones every second
Overload: Beeping continuously
Fault: Beeping continuously

The post Uninterruptible Power Supply (UPS) with LCD Display 2000VA appeared first on Eastern Transformers & Equipment.