Product Description
This unit has a selectable input of 110~120V AC or 220~240V AC.
Supplied with software and USB cable.
The output is simulated sine wave on battery mode and is via a 1 metre cable with IEC plug and IEC socket.
Designed to offer total power protection to a broad range of commercial and industrial environments.
Applications include PCs, workstations, and printers.
Provides clean and reliable backup power to ensure continued data integrity and optimum performance under a wide range of mains power conditions.
This high level of power protection can be incorporated with the advance power and management diagnosis software package that will allow your IT manager or systems integrator to remotely monitor and manage both the UPS and the network server.
The transfer time is typically between 2 ms and 6 ms with a maximum of 10 ms.
The wave form in battery mode is simulated sine wave.
The output AC voltage regulation is +/- 10% and the output frequency range is +/- 1 Hz.
The typical recharging time is 6~8 hours recovering to 90% capacity.
Overload and overcharge protection.
Noise level less than 40dB.
Management data is via the RS-232 / USB port and it supports Windows 2000/2003/XP/Vista/2008/7, Unix, and MAC.
The operational environment has a humidity range of 0~90% RH at 40 °C (non-condensing).
Main features include:
AVR boost and buck,
Cold start function,
Smart RS232 / USB interface for power management,
Built-in self diagnostic function,
Modem / LAN internet protection,
Compatible with generator sets (optional),
LED display showing status (red, amber, and green),
Fast charging capacity,
Auto charging at ‘off mode’,
Auto re-start function.
Alarm modes are as follows:
Battery mode (every 10 seconds),
Low battery (every second),
Overload (every 0.5 seconds),
Battery replacement alarm (every 2 seconds),
Fault (continuous).
Reviews
There are no reviews yet.