STOCK RANGE OF SINGLE OUTPUT 24V DC SWITCHED MODE POWER SUPPLIES WITH BOTH SINGLE OR THREE PHASE INPUTS

 

Competent COSMO slim line series

 

Slim construction to maximise space on the DIN rail

 

Covered input connections and range of 5A -20A at 24V DC

 

Power factor correction to EN 61000-3-2

 

Extended output voltage range

 

Balanced load sharing when wired in parallel

 

Low ripple < 50mV

 

Overload indicator

 

Approvals include UL and CUL

 

Special optional functions

 

The Competent COSMO slim line series offers the design engineer the optimum in design excellence for a comprehensive range of 24V DC applications.

 

The slim construction maximises the space on the DIN rail and units from 24V DC 5A to 20A have a unique termination cover to protect the connections and the wiring.

 

The terminations are a cage clamp type for ease of wiring and consistent reliability. All units comply with EN 61000-3-2 for the latest power factor correction requirements.

 

The DC output voltage is adjustable as shown in the table below and when they are wired in parallel the load is balanced automatically between the units. The output ripple is below 50mV and in the event of an overload a red LED indicator is activated.

 

Special optional functions include remote ON/OFF control, overload signalling, power failure signalling and has the option of either hicc-up mode or turn-off mode for the output overload protection.

 

The units are fully approved to the highest standards including UL,CUL and LGA.

 

 

 

Competent COSMO conventional series

 

High quality and reliability with proven track record

 

From 2.5A to 40A at 24V DC

 

In both single and 3 phase inputs

 

Overload indicator

 

Safety standard to IEC 950, EN 60950 and VDE 0805

 

RFI suppression to EN 55011/ EN 55022 class B

 

Noise immunity to EN 50082-1/-2

 

The Competent Cosmo conventional series of 24V DC range offer high specification and proven reliability.

 

The range has been extensively used throughout the world and has a proven track record for long term reliability and high quality. Units are available from 24V DC 2.5A to 40A and are available in both 1 ph and 3 ph inputs. RFI suppression is to EN 55011/ EN 55022 class B and noise immunity is to EN 50082-1/-2.

 

They are fully protected against overload and short circuit and are in accordance to IEC 950, EN60950 and VDE 0805 safety requirements . All units have an inbuilt ’on’ indicator.