SINGLE OUTPUT RANGE OF AC TO DC DIN RAIL MOUNTED SWITCHED MODE POWER SUPPLIES

FROM 20W TO 500W IN VARIOUS VOLTAGES WITH 20~24W AND 45W EX STOCK

 

Competitive prices

High quality, approved to UL,CUL and CE

From 20~24 Watt up to 500 Watt versions

Ex stock : 20~24W unit only 45mm wide, 45W unit only 49mm wide optimising the space on the DIN rail

Wide input range from less than 100V~240V AC 1 phase

Output voltages of 5V, 12V , 24V and 48V DC

EMC standards EN55022 class B,EN61000-3-2,3(All)EN55024

    

A high quality, highly cost effective range of DIN rail mounted switched mode power supplies from 20~24W up to 500W.

The 20~24W unit is 45mm wide and the 45W unit is 49mm wide, optimises the space on the DIN rail. Both these types are ex

stock. All units are available in a variety of output voltages and are approved to UL,CUL and are CE marked.They have

universal inputs and all units are fully protected against overload, short circuit and over voltage and have an LED ‘power on’

indicator. Each unit is subjected to a 100% full load burn-in test.

 

EMC standards are as stated above and all units have a DC output adjuster to provide +/-10% of rated output voltage.

Safety standard are to UL 60950, CSA 60950 and CE 60950 (marking).

 

All units have a full 2 years warranty and are designed for an ambient temperature range from –15 to 50 deg C.

 

Additional Data

 

• Hold up time 16ms

• Short circuit protection - Auto recovery

• Over load protection - Automatic power limited

• Over voltage protection - Auto recovery

• MOSFET designed

• Operating humidity 5~95% RH, no condensing

• Storage temperature –20 to +85 deg C

• Vibration 2G 10~500Hz, 3 axes

• Convection cooled

• 350,000 Hrs MTBF per MIL-HDBK-217K